描述: |
龙门铣床 WALDRICH COBURG GM 600/30000
二手机
The machine is formed of the following main assemblies: floor table,
left and right beds, gantry assembly (a saddle and a column on the
each bed , a cross-rail, and a cross beam ) and two milling heads. The
gantry is guided by the slideways of the two beds and the cross rail
is guided by the slideways of the two columns. The milling heads
travel on the cross rail guideways. Inside of the each milling head is
guided a ram with the main spindle.
Fixed table length 36 000 mm
Fixed table width 6 000 mm
Distance between columns with covers / without covers 6 900 / 7 100
mm
Gantry travel 30 000 mm
Cross rail travel 3 100 mm
Milling heads (right and left) travel on cross rail 7 400 mm
Vertical travel of right and left rams 1 000 mm
Gantry work feeds 0 - 6 000 mm/min
Gantry rapid feed 10 000 mm/min
Milling heads (right and left) work feeds 0 - 3 000 mm/min
Milling heads (right and left) rapid feed 3 000 mm/min
Vertical rams (right and left) work feeds 0 - 2 000 E661673 mm/min
Vertical rams (right and left) rapid feed 2 000 mm/min
Cross rail fine positioning 0 - 750 mm/min
Cross rail rapid feed 1 000 mm/min
Fine positioning for work axes 5 mm/min
Main spindles (right and left) speed range (on 3 steps) 4 - 475 rpm
Taper of milling spindles ISO 60
Diameter of milling-spindle nose 221.44 mm
Machine dimensions (L, W, H) 43 000 x 12 000 x 10 000 mm seller
offer No. resale P230427047
|