描述: |
焊接烟雾排风机 TEKA Cartmaster
新机
: 1860 m³/h : Pressung 2.900 Pa : 1,1 kW filter surface
area: 10 m² : 72 dB(A) : 400/50 V/Hz : 665 x 1100 x 1495
mm : 200 kg - Hose arm 3 m, joints inside - Filter
cartridge: dust class M - Pre-filter: baffle plate - Current
type: 3Ph+N+PE
The filter
system --------------------------------------- The mobile
filter system of the Cartmaster IFA type is thanks to the
automatic Cleaning particularly suitable for welding work with
unalloyed and alloyed steels, galvanized material and aluminum
with heavy smoke development. It corresponds to the safety
requirements for devices Welding fume class W3 (high-alloy steels
with alloy components > 30% Nickel-based alloy).If used as
intended, the system can be used for the Recirculation mode used
because the requirements for the Exceptions according to TRGS 560
are fulfilled. That special developed, dirt-dependent cleaning
system ensures a good cleaning behavior of the filter cartridge,
so that an optimal suction performance is guaranteed
throughout the operation. The cleaned particles fall into a dust
collection drawer from which they can then be disposed of. The
powerful spiral fan ensures even with saturated Filter cartridges
for a high volume flow.
The filter
media --------------------------------------- A baffle serves
as a pre-separator for coarse particles. The filter H651851
cartridge installed below (dust class M, degree of separation >
99%) filters the finest smoke and dust particles. The cartridge is
factory coated which increases the service life.
The
extraction arm ------------------------ The extraction arm can
be moved with the 3 internal joints Position spring support
slightly and is in the set position cantilevered. A throttle flap
integrated in the extraction hood enables the Flow rate
setting.
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1125-2810012
|