| 描述: |
挤压 Ruian Aoxiang Packaging Machinery 2L800
二手机
Extrusion line for blowing polymer films of type ABA, MODEL 2L800
Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD
2017 onwards
Specifications
1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%)
2. Maximum film width: 800 mm
3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3
content - maximum 40%
4. Maximum performance: 100 kg / h;
5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm;
6. Weight: 4.5 t;
7. Main power: 70 kW;
8. Certification: CE European Compliance Certificate, SGS Independent
Examination Certificate, National Compliance Certificate of China
GB4455
Data sheet
1. Extruder (2 sets)
1.1 auger diameter: 55 mm
1.2 Ratio of length to diameter: 30: 1
1.3 Maximum screw rotation speed: 100 rpm.
1.4 Type of screw: mixed type, with a barrier
1.5 The material of the auger of the cylinder: 38CrMo (American
certificate of protection of inventions + Specification of the
conditions of patenting (AIA + PTA)), doped, nitrated;
1.6 Zones of control screw temperature: 4 zones
1.7. Heating method: double stainless steel heater.
1.8 Cylinder heating power: 6.4 kW 2 = 12.8 kW
1.9 The main motor of the extruder: 2 sets, three-phase asynchronous
motor with a capacity of 22 kW x 2 = 44 kW
WNM marks;
1.10 Reducer: Taiwan Sunlun, SL-30, Taiwan 2 sets
a. Transmission Type: Standard Helical Helical Helical Drive
b. Transmission Material: 20CrMnTi
c. Transmission surface: high strength and high grinding precision
d. Drive lubrication method: forced lubrication through oil
circulation
e. Drive cooling method: forced oil cooling with water circuit
1.11 Filter quick change device 2 sets
1.12 Automatic material loader 2 sets
1.13 Melt pressure sensor: 2 pieces
2. Extrusion head (1 set)
2.1 Type of head: ABA type rotating head;
2.2 Material mandrel / matrix: alloy steel, forged and heat
treated;
2.3 Matrix diameter: â 200 mm (LDPE); â 100 mm (PND);
2.4 The die gap: â 200mm 1.75mm ï¼ â 100mm 1.5 mm;
2.5 Surface of the head and chrome channels
2.6 Method of heating: dual layer heating element
3. A ring of an obduv (2 sets) (PVD + PND)
3.1 Type: Double Edge Blow Ring
3.2 Material: cast aluminum
3.3 Air blower power: 3.7 kW
4. Basket stabilization film bubble (1set.)
4.1 Type: circular structure
5. Folding frame and corner folding device
5.1Material: steel supporting E561673 frame + special aluminum
profile
6. Broaching device (1 set)
6.1 Power of the primary pulling engine: 1.5 kW
6.2 Feed Speed: 120 m / min.
6.3 Distance from floor surface: 6.0 m
6.4 Type of winder clamping device: pneumatic
6.5 Material winder: ethylene propylene rubber
7. Wrap (1 set)
7.1 Type of winder: automatic double surface winder winder. Winder
material: ethylene propylene rubber
7.2 Maximum winding width: 800 mm
7.3 Maximum winding diameter: 800 mm
7.4 Maximum winding speed: 120 m / min.
7.5 Equipped with meter counter
7.6 Device for removing static electricity from the winder: 2
pieces
8. System of electric regulation (1 set)
8.1 Temperature controller: Yudian, China
8.2 Magnetic starter: Chint, China
8.3 Converter: Invoance, Shenzhen
9. Frame tower (1 set)
9.1 Structure: non-separable, with a secure operator platform and a
protective barrier
10. Corona treatment device 1 set
11. Machine for processing technological returnable film waste: 2
sets
seller offer No. resale P90320151
|