描述: |
高速加工中心 Roders RXP600 DSH
二手机
Roders RXP600 DSH Precision High Speed ââCNC Milling
Center
Machining range for horizontal table position: X 500 mm, Y 855 mm, Z
400 mm
Distance from spindle nose to table: 515 mm
Tool magazine: 28 positions
Overall dimensions in transport position: W 2300 Ã D 2800 Ã H
2920 mm.
Total weight: 10200kg.
Spindle
Model: FISCHER HSC 40 - high-frequency milling, vector-controlled
spindle, FISCHER (Germany)
Power: 14 kW, 3000-42.000 rpm
Tool holder HSK 40:
Maximum tool diameter: 16 mm.
Desktop
Swivel rotary table with thrust bearings for highest rigidity and
accuracy, integrated in the X-axis.
A-axis tilt range: +/- 115 degrees.
C-axis tilt range: +/- 360 deg.
Workpiece weight: 200 kg.
T-slot table size 340 à 340mm (ø400)
Groove width: 12mm.
Distance between grooves: 45 mm.
Linear motors: all axes
Cooling of the main and secondary parts for the purpose of temperature
stabilization of the machine
Compensation for uneven feed force in the CNC
Swivel axle drives
Drives: Direct with high dynamics and precision.
Feed rate: 0 - 40,000 mm / min in all linear axes
Acceleration on all axes: 2G
Work zone
Isolation: completely closed - two doors equipped with protective
screens, a good view of the working area; convenient loading of
workpieces using a crane.
Sealing machine units: all machine units are protected from
contamination; with the use of an industrial vacuum cleaner, it is
possible to process cast iron, plastic and graphite.
Control
Control type: ROEDERS HSC numerical control RMS6, 17 LCD monitor
Reading time of the 1st frame: less than 0.1ms
Uninterruptible Power Supply: Built-in
Tool geometry measurement: laser measuring system
Optical ruler: 3-axis
Automatic 3D measuring probe: information transfer via IR interface,
several measuring cycles are available via CNC.
Collision detection function.
Handwheel for manual control of the machine
Airborne lubrication
Refrigerant and lubricant supply with 2 2-piece nozzles, no waste
disposal required
Workpiece cleaning: A compressed air jet for workpiece cleaning is
integrated in the Z-axis.
Tool cleaning device: A nozzle designed to clean the tool before
measuring with a jet of compressed air.
Manual cleaning of the working area: a pump connected to the standard
exhaust port on the back of the machine.
Cooling system for motors and machine tool spindle
Required air quantity according to ISO8573.1 (class 4):
solid contaminants: max. size 15μm, max. particle density 8 mg
/ m³
total oil content: max. E661673 oil concentration 5 mg / m³
maximum dew point pressure: + 3ºС.
Connections
Electric: 380V +/- 63A;
Pneumatics: 6.5 bar, consumption max. 600l / min
Additionally
In the event of a power failure, the Z axis of the machine will be
lifted to prevent breakage of the workpiece and tool
Oil mist removal system (mechanical)
Chip conveyor for coolant and chip removal
Transformer 380V
External coolant supply system includes:
external coolant pump;
coolant filtration system with a 600 l tank;
heat exchanger for coolant temperature stabilization;
nozzles for supplying coolant to the working area;
gun for washing off shavings.
Repairs carried out
in 2014 the hydroelectric station was replaced
in 2015, the A-axis drive was replaced
in 2016, the Heidenhain optical ruler along the X axis was
replaced with an identical
The physical state
Operating time less than 2000 hours
Spindle lubrication station in perfect condition
There is no wear on the guides
The machine is tested and ready to go seller offer No. resale
P210211009
|