描述: |
多刀片锯 Raimann KD31
二手机
Raimann KD31 double shaft multi-saw
- German production
- year of production 1988
cutting width 340 mm
cutting height 200 mm
material width max. 800 mm
engine power 2 x 55 kW
feed speed smoothly regulated on the inverter
disc diameter max. 350 mm lower shaft 400 mm upper shaft
spindle diameter 65 mm
sleeve diameter 80 mm
four rows of pawls
four upper pressure rollers
electric height adjustment
the ability to work independently with each spindle
ruler
central lubrication
caterpillar with nails
table top height from the base 930 mm
spigot diameter 200 mm
transport dimensions (length / width / height) 320/200/240 cm
weight ~ 5000 kg
Multirip saws are machines used in the wood industry mainly for
cutting piles, but not only. Machines of this type can cut boards into
smaller elements and cut lamellas. The principle of their operation is
very simple, the machine has a spindle located in a central point on
the horizontal axis, on which tools in the form of discs are
installed. Depending on the purpose, weilopaws can have one or two
spindles. In the latter case, the device has greater cutting
possibilities, comparing mainly the thickness of the material. An
additional advantage of machines with two shafts is the lower kerf.
Another major division of machines is the method of material feeding.
They can be separated into shaft E661673 feed and track feed. When
cutting the saw with a shaft feed, the material is moved through the
upper and lower shafts, depending on the design, they can be all or
only the lower shafts. In turn, devices with a caterpillar move the
wood with its help, and the rollers located in the body press the
material against it. The selection of the appropriate machine depends
primarily on the intended use. Consider whether only the pallet box
elements or boards made of expensive exotic wood will be cut. All of
this can influence the choice of the machine. seller offer No.
resale P211014143
|