| 描述: |
木材CNC加工中心 PPCNC PPN1224
二手机
For sale cnc milling plotter with a new 2.2kW electrospindle
controlled by software. The machine works on the Mach3 Usb controller.
HGR15 linear guides with linear carriages on all axes. This
significantly increases the service life and precision of the system
compared to supported shafts. After welding, the frame was milled from
one fastening at the place where the linear guides were installed. The
milling machine is equipped with a backlash compensation system on the
drive bars on the x and y axes.
The machine is ideal for a carpentry modeling workshop or an
advertising agency. Works on HPL, HDF, MDF, PLYWOOD, RUBBER, PMMA,
WOOD, PVC, etc.
The drive of the x and y axes is carried out using racks with a module
of 1.5 and Steinhoff gears. On the axis with a ball screw fi 16 pitch
5mm. Mounted stepper motors with planetary gears guaranteeing better
work resolution and dynamics of returns as well as high torque (we
obtain 16Nm for each axis). Possible disassembly of the machine
(dismountable) to be moved through the door 85cm.
Built-in E561673 tool height sensor and limit sensors.
Technical parameters:
Working area: 130x240x12cm.
Drive: toothed bars M1.5 + ball screw 1605
Motors: stepper 4Nm with planetary gears 4:1 (16Nm) on the axis with
6A 4Nm.
Power supply: 230V
Dimensions: 300x200x165cm. (length, width, height)
Tool height sensor
Adjustable on foot threads
Cutter mounting: ER20
Controls: Mach3 USB
Power supply: 230V
Weight: about 300 kg.
seller offer No. resale P230522040
|