描述: |
立柱移动式铣床 PARPAS SHARK One
二手机
x-travel: 3500 mm y-travel: 1083 mm z-travel: 1074
mm control: HEIDENHAIN iTNC 530 HSCI clamping table: -
surface area: 4.000 x 1.000 mm Thread bore with fitting: -
Feeds: - X-, Y- and Z-axis, stepless: 2 - 30.000
mm/min rapid travel x/y/z: 30 m/min Max. feed force of axis:
10.000 N 2-axis Milling Head: - 2-axis milling head TUB-E92
with power on: - Torque-Motors for 5-axis-simultaneos processing:
- capacity at 100% load: 29 kW Speed stepless: 2- 30.000
max. torque: 92 Nm Max. torque: 60 min-1 tool taper: HSK
62A-DIN 69893 automatic tool changer ATC: - Tool places: 30
diameter of tools max.: 90 mm workpiece length: 320
mm weight of tools max.: 8 kg changing positions: vertikal
electrical supply data: - capacity: 120 A voltage: 400
V operating frequency: 50 Hz total power requirement: 29
kW weight of the machine ca.: 28 t dimensions of the machine
ca.: 8,3 x 6,7 x 3,6 m GEquipment • Machine bed, column
and vertical saddle as welded steel construction, annealed with
low tension • Milling slider as welded steel
construction • Orthogonal milling head TUB-E92 with motor
spindle, C- and A-axis drive via torque motors • Oil
cooling unit for cooling the milling head • CNC thermal
compensation • Spindle drive 29 kW • Spindle speed
max. 18.000 min-1 • Axle drives by means of precision ball
screws and digital servo motors • Touch probe system
manufacturer BLUM, TC 63-30 with radio transmission and automatic
measuring cycles • Milling head Measurement Kinematics
Opt” • Laser tool presetter BLUM - NT version mounted on
machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl.
digital drive technology • Portable electronic handwheel
HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control
panel for machine operation in front of the machine •
Automatic tool changer with 30 magazine places, change position
vertical • Coolant system with external shower rim and IKZ
through the spindle • 1 chip F627320 conveyor in the working
area, ejection right • Pretensioned linear guides in all
axes • Precision ball screws in Y- and Z-axis •
X-axis drive via gear rack and master/slave drive • Hydraulic
weight compensation in the vertical axis • Bellows cover of
the X-axis • Milling slide above and below in the vertical
axis with bellows covers with attached stainless steel lamellas
closed • Work area enclosure closed on all sides. Back side
of the work area with bellows cover with attached stainless steel
lamellas closed. The manual sliding doors on the front of the
machine can be opened and closed over the entire length of the
table. Safety fencing for the back machine area with two secured
access doors.
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1118-15921
|