描述: |
钣金去毛刺机 NKO Anfassystem UZ18 HARDWORKER
新机
diameter: -- mm workpiece length: -- mm work piece width: 18
mm range of angles: 15° - 50° ° weight of the machine ca.:
110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width
18 mm with automatic feed
The UZ18 Hardworker machine is one
of the most powerful automatic feed beveling machines on the
market. It is not only suitable for workshops, but also for
on- site assembly. The machine has a stepless working angle
adjustment system. Thanks to the special design of the drive
system, the UZ18 Hardworker is also suitable for harder
materials. The machine is equipped with the automatic feed.
Working with UZ18 Hardworker is therefore very
convenient.
For conventional steel (up to 600 MPA/87022 PSI
strength), brass, copper and aluminum materials For
chamfering workpieces with the minimum dimensions of 70 x 150 x 6
mm Application range of sheet thickness 6 - 40 mm The bevel
angle can be easily adjusted continuously from 15° to 50° without
replacing any part Double-sided bevel (X, K) with no
material handling Easy connection to 3D manipulator for easier
operation and handling Silent working Equipped with
automatic feeder Stationary or mobile use The machine works
with large workpieces without any support at a speed of H651851 1.9
m/min Smaller workpieces are placed directly in the
machine
- Max. bevel width (hypotenuse): 18 mm -
Infinitely adjustable angle: 15° - 50° - Area of application
sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9
m/min - Weight: 110kg - Dimension: 438 x 719 x 644
mm
We are happy to offer you an optional 3D manipulator
(mobile) for this device on
The data
for this ad was created with ModulMWS - the software solution of
LogoTech oHG.
seller offer No. resale 1125-2230015
|