mori seiki nv used for sale

MORI SEIKI MV 65-50 Year 1986 - STROKES (mm) X = 1270 Y = 650 Z = 650 -FANUC 11M CNC control -Tool holder -30 tool warehouse

Mori Seiki NVX 5080. Year 2012. 3 axis machine. Interface for 4-axis installation. Cone head BT 40. Motor power 15 Kw high torque. Cutting power 280 N/m. Automatic conversational programming system Mapps 4. Automatic effort control and tool consumption monitor. Parameterized automatic tool anti-collision system. Communication ports via Usb, PCMcia card and Rs 232. Tool life management and tool consumption monitor. Automatic torque and tool stress control. Table dimensions 1.100 x 600 mm. Weight admissible 1.100 Kg. Spindle speed 13.000 rpm. X axis displacement 800 mm. Y-axis displacement 530 mm. Z axis displacement 510 mm. Daikin cooler for spindle oil. Rapid traverse speed 30.000 mm / min. Storage for 30 tools. Power motors axes ( XYZ ) 3 /3 /4,5 Kw. Capacity of coolant tank 600 liters. Tool change time 0,5 seconds. Chip-to-chip time 5  ...

x-travel: 1050 mm y-travel: 520 mm z-travel: 510 mm control: M 730 BM number of spindle speeds: 13000 tool taper: MAS BT 40 transmission ratio: 1 spindle diameter in front bearing: 80 mm table surface area: 1350 x 600 mm table load: 1,2 t distance spindle /table: 150-660 mm numbers of tools in magazin: 30 diameter of tools max.: 80 mm tool length - max.: 300 mm weight of tools max.: 8 kg tool changing time: 1,3 sec change-time chip to chip: 3 sec rapid travel x/y/z: 1-30 m/min feed: 1-30000 m/min Number of axles: 3+1 St. total power requirement: 25,7 kVA weight of the machine ca.: 7 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machining Center Mori Seiki NVX 5100 II/40, built 2012, with 3+1 axes Machining hours: under power ON/OFF 32.499h working hours 8.595h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: MSX 853 MAPPS IV Working area 1Longitudinal800 mmCross530 mmVertical510 mmTechnical DataDrive power (100% DC)11 kWDrive power (40% DC)15 kWSpeed range-12000 rpmSpindle taperBT 40 Feed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)2,46 x 2,96 x 2,60 (3,26 x 3,72 x 2,6) mWeight approx.6350 KgSpecial equipment2 additional axes make Lehmann/Fanuc

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

Machine Details Stock number 1105-03771 Machine type CNC lathe Brand MORI SEIKI Type SL 25 B/500 Year of construction 1992 Control type CNC Control mori Fanuc MF T6 T6 fanuc mori Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control mori Fanuc MF T6 T6 fanuc mori Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 10 pos. VDI Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t  ...

MORI SEIKI SH-503 4-axis horizontal machining center manufactured in 10/2000 in Japan by Mori Seiki CO. LTD. The CNC milling machine is equipped with the Mori Seiki MSC-501 numerical control. -Cone BT40 chain 120 tools -HP spindle center coolant pump -Roto pallet 2 pallets -2 4-sided cubes - CNC control : MORI SEIKI MSC-501 - machine weight: 10100 kg -In working order -Price excl. dismantling, loading and transport

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes Muratec MW 120 GT 2012

Machine Details Stock number 1105-03838 Machine type CNC lathe Brand MORI SEIKI Type SL 25 A/500 Year of construction 1991 Control type CNC Control MORI T5 FABT FANUC Storage location HAGUEANAU FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control MORI T5 FABT FANUC Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 12 P Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t Space requirement ap ...

We hereby offer this used Mori Seiki NL 2500 SY CNC lathe from 2008, located in Spain. Boasting a substantial turning length of 755 mm, this machine offers unparalleled versatility in shaping your metal components. Fueled by a robust 18.5 kW motor, it ensures powerful and precise machining operations. The machine is seamlessly controlled by the Mori Seiki MSX-850 III unit, providing advanced functionalities for efficient workflow management. Technical specifications: Control unit: Mori Seiki MSX-850 III Turning length: 755 mm Turning diameter: 365 mm X-Z axis fast traverse speed: 30 m/min Y-Axis travel: +- 60 mm Number of axes: 5 Bar pitch: 80 mm Spindle taper: A2-8 Secondary spindle taper: A2-6 Motor power: 18.5 kW Sub-spindle motor power: 11 kW Spindle speed: 4000 rpm Turret: 12 stations motorized Speed of motorized tools: 6000 rpm Dimensions: Length: 4420 mm Widt ...

We hereby offer this used Mori Seiki SL 303 MC / 1500 CNC lathe from 2003, located in Spain. Boasting precision and versatility, this powerhouse is armed with the advanced Mori Seiki MSX 501 control unit, ensuring seamless operation and control. With a substantial turning length of 1450 mm, it accommodates diverse machining tasks, while the formidable 3000 rpm spindle speed guarantees swift and accurate results. The dynamic motor power of 22/18.5 kW adds to its prowess, making it a reliable choice for demanding metalworking applications. Technical specifications: Control unit: Mori Seiki MSX 501 Turning length: 1450 mm Turning diameter: 755 mm Machinable diameter: 450 mm X-Z fast traverse speed: 25 m/min Bar passage: 90 mm Spindle taper: A2-11 Spindle speed: 3000 rpm Motor power: 22/18.5 kW Hydraulic steady rest Autoblok diameter: 245 mm Turret: 12 stations motorized Spee ...

Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

CNC Vertical Machining Center MORI SEIKI mod. SV-503 Manufacturer: Mori Seiki Model: SV-503 YOM: 2001 Technical details: Table size: 1300x600 X-axis travel: 800 mm Y-axis travel: 510 mm Z-axis travel: 660 mm Spindle drive motor: 30 HP Spindle speed: 10000 rpm Tool changer: 30 ATC Spindle taper: 40

Mori Seiki NT 1000 multitasking lathe :::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC Version: Mapp - Spindle Nose: ASA 5 - Spindle Power: 11Kw - Main Spindle Speed: 6000 Turning diameter: 370mm - Self-centering diameter: 210mm - Bar passage: 42mm - Turning length: 424mm - Number of tools: 90 Tool holder: CAPTO C4 Spindle speed: 12000 X-axis travel: 380mm Y-axis travel: +105 -105mm Z-axis travel: 460mm Swivel B-axis travel: +120° -120° degrees Rapid feeds linear axes X Y Z: X 40 Y 40 Z 50m/min High refrigerant pressure: yes Pressure value: 50bar External tank system with filter: yes Number of Tool Turrets: 1 Number of first turret tool slots: 10 Number of fixed tool positions in the first turret: 10 First Turret X-Axis Travel: 155mm First Turret Z-Axis Travel: 610mm Sub-spindle: yes Sub-spindle speed: 5000 Sub-spindle power: ...

Mori Seiki ZT 1500 YB horizontal bar-loading lathe :::SPECIFICATIONS::: CNC Model: Mori Seiki CNC version: MSX 501 Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle bar clearance: 65mm Turning diameter: 190mm Turning length: 235mm Main spindle revolutions: 5000 Number of tool turrets: 2 Number of tool places before turret: 16 Number of motorized first turret: 16 First turret tool attachment type: VDI 30 X axis travel first turret: 140mm Y axis travel first turret: +- 50mm Z axis travel first turret: 700mm Number of tool spaces second turret: 16 Number of motorized second turret: 16 Second turret tool attachment type: VDI 30 X axis travel second turret: 140mm Second turret Z Axis Stroke: 690mm Rapid feeds linear axes X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 6 Number of counterspindle r ...

Key data: 935 mm, 2030 mm, 2400 1/min

achine details Stock-No. 1105-03966 Type of machine CNC Lathe Make MORI SEIKI Type SL 403 B X 2000 Year of manufacture 2003 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter max. 935 mm centre distance 2063 mm control MSG Fanuc 518 Standard Turning Dia. 730 mm Turning Speed Range - Main Spindle 2400 min/-1 power capacity - main spindle 30 / 22 kW Spindle Bearing Diameter 240 mm usable bar diameter 117 mm Chucking diameter 500 mm spindle nose ASA-A2 / 11 number of toolpositions 12 pos. Shank diameter 32 mm X-Axis 345 mm Z-Axis 2100 mm diameter of quill 150 mm Tailstock Adjustment 1,500 mm taper of center MT 5 total power requirement 144 kVA Weight of the machine approx. 15.0 t dimensions of the machine approx. 6.2 x 3.0 x 2.6 m Accessories Docu ...

Horizontal machining center Mori Seiki SH 630 ::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC version: MSC - 516 - Tool connection: iso 50 - Spindle power: 30Kw - Number of spindle revolutions: 10000 Number of tools: 60 - X Axis Stroke: 840mm - Y Axis Stroke: 760mm - Z Axis Stroke: 840mm Rapid feeds linear axes X Y Z: 50m/min Pallet size: 630x630mm Pallet type: indexed Pallet degrees: 1 Maximum load allowed: 1200Kg High cooling pressure: yes System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 5537mm Width: 3172mm Height: 3205mm Weight: 18500Kg

Mori Seiki ZL 203 CNC lathe 4 axis live tools Mori Seiki CNC model MSC501 CNC Main spindle nose ASA 6 Main spindle power 11 Kw Chuck 210 mm Main spindle bore 51 mm Turning diameter 510 mm Turning length 752 mm Number of RPM of the main spindle 4000 Number of tool holder turrets 2 Number of tool places first turret 12 Number of live tools first turret 12 First turret X-axis travel 235 mm Z axis travel first turret 520 mm Number of second turret tool places 8 Number of fixed tool places for the second turret 8 Second turret X-axis travel 175 mm Second turret Z-axis travel 490 mm Linear axis rapid feeds X Y Z 24 m/min Tailstock yes Automatic positioning Presetting yes Number of live tool holders supplied 7 Number of fixed tool holders supplied 28 2003, Mimu machine tools Italy

Key data: 356 mm, 705 mm

Machine Details Stock-No. 1105-03951 Type of machine CNC Lathe Make MORI SEIKI Type NL 2500 /700 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Technical details turning diameter 356 mm turning length 705 mm control MSX-850 II MAPPS X-Axis 260 mm Z-Axis 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm turret change time 0,25 sec. rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine approx. 3.1 x 2 x 2.2 m Accessories Documents  ...

Key data: 1050 mm, 560 mm, 560 mm

Machine Details Stock-No. 1105-03956 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 55 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex site Price Technical details x-travel 1050 mm y-travel 550 mm Z-Travel 560 mm control FANUC O M table-size 1,400 x 550 mm max. table load 1500 kg turning speed range - milling 6000 rpm tool taper BT 50 Tool changer 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 15 m/min rapid traverse Y-axis 15 m/min rapid traverse Z-axis 12 m/min Feed 0.001 ~ 5.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 10 t dimensions of t ...

This MORI SEIKI CL-200 Lathe was manufactured in the year 1998 in Japan. It is equipped with a MORI SEIKI MSC-803 control unit. The machine has a spindle speed of 3500 rpm.

This MORI SEIKI Frontier L1 Lathe was manufactured in the year 1996. It is equipped with a MORI SEIKI MSC 521 control unit. The machine is in good conditions.

This DMG MORI SEIKI DuraTurn 310 eco Lathe was manufactured in the year 2010 in Japan and has 20000 under power hours, of which 5000 are production hours. It is equipped with a MORI SEIKI MSX 853 MAPPS IV control unit.

Mori Seiki NL 2500 MC / 1250 cnc lathe Mori Seiki NL 2500 MC / 1250 , year 2006, only 5,800 hours of cutting, programmable hydraulic steady rest Autoblok

Manufacturer MORI SEIKI Model NLX2500SY/700 Month / Year 12/2011 CNC MORI SEIKI M730 BM Capacities Swing over bed 590 mm. Swing over cross slide 360 mm. Max cutting diameter 460 mm. Max cutting length 795 mm. Bar work capacity 80 mm. Y axis INCLUDED Travels and feeds X axis travel 260 mm. Y Axis travel ±50 mm. Z axis travel 795 mm. Spindle 2 B axis travel 734 mm. Rapid traverse rate X, Z, B axis 30.0000 mm/min Rapid traverse rate Y axis 10.0000 mm/min Jog feedrate X, Z, B, Y axis 0-5.000 mm/min Spindle C axis in spindle INCLUDED C axis index in spindle 0.001º Spindle speed 4.000 rpm Spindle speed ranges 2 Spindle nose JIS A2-8 Through-spindle hole diameter 91 mm. Spindle drive motor 18.5 kW Spindle 2 C axis in spindle 2 INCLUDED C axis index in spindle 2 0.001º Spindle 2 speed 6.000 rpm Spindle 2 speed ranges 1 Spindle 2 nose JIS A2-5 Through-spind ...

Key data: 1020 mm, 510 mm, 460 mm

Machine Details Stock-No. 1105-04002 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 50 Year of manufacture 2001 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery immidiately Freight basis ex site Technical details x-travel 1020 mm y-travel 510 mm Z-Travel 460 mm control MSG 500 table-size 1350 X 550 mm max. table load 800 kg turning speed range - milling 8000 rpm tool taper BT 40 Tool changer 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 32 m/min rapid traverse Y-axis 32 m/min rapid traverse Z-axis 24 m/min Feed 0.001 ~ 10.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 5.7 t dimensions of the machine appr ...

Turning diameter: 150 mm Turning length: 520 mm Turret positions: 1 Positions ATC: 12   Number controlled axis: 4   CNC Brand: Fanuc CNC Lathe with y-axis MORI SEIKI - SL 154 SY MACH-ID 8586 Make: MORI SEIKI Type: SL 154 SY Control: MAPPS FANUC Year: 2000 LNS hydrobar feeder Chip conveyor Live tooling 70 mm sroke Y Axis C Axis 360.000 Working hours 3090 H Max. turning Ø:  150mm X-Axis:          200mm Y-Axis:          - 35 to  35mm Z-Axis:          520mm Spindle bore:    52mm Speedrange:      6000Rpm Subspindle speeds:5000Rpm ATC / revolver:  12 Speed live tools:4000Rpm Power live tools:5,5kW Length:          2800mm Width:           2100mm Height:          2300mm W ...

Turning diameter: 256 mm Turning length: 590 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Fanuc CNC Lathe with y-axis MORI SEIKI - NL 1500 SY MACH-ID 8587 Make: MORI SEIKI Type: NL 1500 SY Control: MAPPS FANUC Year: 2005 Part catcher 3 chuck with jaws C-Axis 360.000 Y-Axis 100 mm travel Chip conveyor Hours 5390 H Max. turning Ø:  256mm X-Axis:          260mm Y-Axis:          + 50 to - 50mm Z-Axis:          590mm B Axis:          624° Spindle bore:    52mm Speedrange:      6000Rpm Spindle power:   15kW Subspindle speeds:5000Rpm Subspindle bore: 40mm ATC / revolver:  12 Speed live tools:5500Rpm Power live tools:5,5kW Length:          3200mm Width:   ...

Key data: 356 mm, 705 mm

Stock number: 3892 CNC LATHE Manufacturer: MORI SEIKI, Type: NL 2500Y/700 Machine NO.: NL251382843, Year of manufacture: 2007 Specifications: Max. circulation diameter 356 mm dia. Turning length 705 mm Turning over pad slide 755 mm dia. Main spindle speed range 4000 rpm Spindle bore 91 mm dia. C Axis - Main Spindle Movement 0.001 Degree X axis movement 260 mm Z Ash Movement 795 mm Y axis +/- 50 mm Tool turret with 12 stations Driven werkzeuumdr. 6000 rpm Control Mori Seiki MSX-850 III ( Fanuc ) Fabr. Operating hours spindle 6300 hours Controlled in 4+1 axes Accessories: Hydr. Chuck main spindle KNC-N 225 dia Bore 66 mm dia Driven Angle Tools 4 Pieces Driven tools straight 2 pcs. Various tool holders. Tool setter Cooling water system. Controlled Tailstock Loader LNS Quick Load Servo 65-80 x  ...

Mori Seiki SL 2500 Y / 650 / Multifeed Bar Loader Mori Seiki SL 2500 Y. 4 axis machine. Hydraulic and programmable tailstock. Multifeed bar loader 1,5 meters. Turret with 12 stations, all of them motorized. Y-axis travel +- 60 mm. C-axis. Integrated main spindle motor 18,5 KW. Motorized tools motor 5,5 kW. Motor starting torque 640 N/M. Integrated motor without belts or steps. Main spindle size A2-8. MT5 Morse taper tailstock. Bar pitch 75 mm. Kitagawa B-210 main spindle chuck 250 mm with metric system. Prismatic guides on all axes. Main spindle speed 3.500 rpm. Speed of driven tools 4.000 rpm. Turning diameter 755 mm. Machinable diameter 390 mm. Machinable length 655 mm. Oil cooler for Daikin spindle. Mapps 4 automatic conversational programming system. Automatic effort control and tool consumption monitor. Speed of rapid traverse 18 a ...

Key data: 1400 mm, 1200 mm, 1350 mm

A horizontal machining center from the manufacturer Mori Seiki NH 8000 DCG is offered here. The machine is in good condition and can be visited. Make: Mori Seiki Huzvdlw Type: NH 8000 DCG Year of Make: 2008 Control: Fanuc MSX-701III Specifications: Travel: X-axis 1400 mm Y-axis 1200 mm Z-axis 1350 mm B-axis rotary table 360x0.001° automaton. Tool changer with 60 tool positions Tool holder HSK 100 2-fold pallet changing system Pallet dimensions 800 mm x 800 mm max. tool length 800 mm max. tool weight 30 kg Spindle power 37 KW Max. spindle speed 8000rpm. IKZ cooling system

DMG Lasertec 20 + PH10 I 100 Lid Maho Mori Seiki PrecisionTool Hersteller [manufacturer]: DMG Mori Seiki DMG Deckel Maho + Linear Magazine Sauer Baujahr[construction year]: 10/2013 Type [ type]: LaserTec20 Control unit: Siemens 840D SolutionLine Incl. control panel handheld Fiber laser system 20 W YLP-C-1-100-20-20 Active Medium Ytterium Wavelength 1065 nm (1055 nm – 1075nm) Average power 100W Repittion rate 20kHz – 100kHz Pulse length 100 ns- 150 ns Travel Distances X-Axis: 200mm Travel distances Y-axis: 200mm Travel distances Z-axis: 280mm C-axis clamping surface: 190mm Rotation range C-axis: 360mm Rotation rotary table 150 rpm Weight approx.: 3.600kg Technical documentation/documents available in detail

Turning diameter: 680 mm Turning length: 495 mm Turret positions: 12 Positions ATC: 12   Number controlled axis: 1   CNC Brand: Fanuc CNC Lathe with c-axisMORI SEIKI - SL 200 SMC MACH-ID 8585 Make: MORI SEIKI Type: SL 200 SMC Control: MAPPS FANUC Year: 1998  Sub spindel All ATC with Live tooling C Axis 360.000 LNS Hydrobar vbar feeder Power on hours 4700 H Running 2000 H Max. turning Ø:  680mm X-Axis:          235mm Z-Axis:          495mm B Axis:          505° Spindle bore:    51mm Speedrange:      4000Rpm Spindle power:   12kW Subspindle speeds:3000Rpm Subspindle bore: 62mm Subspindle power:10kW ATC / revolver:  12 Speed live tools:4000Rpm Power live tools:5,5kW Length:          2800mm Width:  &nbs ...

Turning diameter: 420 mm Turning length: 750 mm Turret positions: 10 CNC Brand: Mori Control CNC Model: Maps MACH-id      5025 MAKE           Mori Seiki Japan TYPE              NL 3000 MC / 750 YOP                 2007 SPECIFICATIONS Max. turning  Ø     420 mm X-Axis         280 mm Z-Axis          820 mm Spindle bore       105 mm Speedrange       3000 Rpm Spindle power        22 kW Subspindle speeds        5.5 Rpm ATC / revolver        10 Speed live tools         6000 Rpm Control         MAPS Chip conveyor  &nbs ...

Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN

Table length: 1700 mm Table width: 660 mm Longitudinal X: 1524 mm Cross Y: 650 mm Vertical Z: 650 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mori Control MAKE   Mori Seiki TYPE    MV 65 B / 50 YEAR   1997 SPECIFICATIONS X - Travel    1524 mm Y - Travel    650 mm Z - Travel     650 mm bed / plano / portal / moving column    VMC Table Length x Width   1700 x 660 mm Table load in kG    2000 Kg Spindle Taper    Bt 50 kW power on spindle    35 Hp kW Spindle speeds / ranges    6000 Rpm ATC tool changer    30 Pos x Ø 240 x 20 Kg Coolant true spindle / Bar   Yes Bar Number off controlled axis   3 DIMENSIONS Length    3280 mm Width     2260 mm Height    2950 ...

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

Key data: 800 mm, 700 mm, 700 mm

Machine Details Stock-No. 1105-03969 Type of machine Machining Center - Horizontal Make MORI SEIKI Type SH 503/40 Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EXW (Incoterms 2000) loaded on Price Technical details x-travel 800 mm Y-Travel 700 mm Z-Travel 700 mm control MTSUBISHI turning speeds 10000 1/min Spindle Drive 30/25 kW Number of tool station 60 BT 40 max. tool length 400 mm max. tool weight 12 kg tool changing time 1,3 sec numbers of pallets 2 Pallet dimension 500x500 360000° mm working diameter max.730 mm table load 0.5 t Rapid Travel X/Y/Z 50 m/min total power requirement 50 kVA weight of the machine approx. 14 t Accessories Chip conveyor Additional information WITH 4 AXIS 360000° AND MORI MSG 805 CONTROL BT 40 10000 TPM MAGASIN 60 TOOLS C ...

Key data: 420 mm, 420 mm, 350 mm

Machine Details Stock-No. 1105-03975 Type of machine Machining Center - Vertical Make MORI SEIKI Type TV 400 Year of manufacture 1997 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis EX WORK Technical details x-travel 550 mm control MSC 802 M table surface area 700 x 400 mm y-travel 420 mm Z-Travel 350 mm turning speed range - milling 8000 rpm tool taper BT 30 power capacity - milling spindle 7,5 kW No. of tools in magazin 20 stations feed range 1 - 15000 mm/min Rapid traverse 56000 mm/min total power requirement 10 kW Weight of the machine approx. 2000 kg dimensions of the machine approx. 1,600x1900x2400 mm Additional information control MORI MSG 802 m very nice machine

This Mori Seiki NZ2000T3Y3 Lathe was manufactured in 2008 in Japan. It operates with a FANUC-MORI SEKI MSX Control unit, a spindle speed of 5000 rpm, 3 turrets, 3 Y-axis and 2 C-axis. The spindle bar diameter is 65 mm and the turning diameter is 320 mm. This turning machine can handle a max. turning length of 810 mm. It comes with a chip conveyor, LSN Sprint S2 bar loader, high pressure pump, presetting and a set of tools. It is in an excellent condition.

Key data: 1090 mm, 250 mm, 550 1/min

Mori Seiki SL 80F CNC lathe (chucker) CNC control MF-T5 (Fanuc 15 TA) Circulation diameter above bed 1300 mm Turning diameter 1090 mm Turning length 250 mm X-axis travel 425 mm Z-axis travel 1100 mm Spindle speed 550 rpm Spindle nose A2-15 Spindle motor 45 kW Number of tools on turret 6 Tool Cone Mori If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Turning diameter: 350 mm Turning length: 700 mm Turret positions: 12 CNC Brand: Heidenhain CNC Model: Ergoline MACH-id     5145 MAKE          DMG Mori Seiki TYPE            NEF 400 SERIAL         01620008871 YOP                2013 SPECIFICATIONS Swing         350 Control       Heidenhain Ergoline Chip conveyor       Yes Working hours     12.024 H Max. turning diamter Ø   350 mm DBC Turning length     700 mm Main Spindle speed     4.500 ATC / revolver      12

Turning diameter: 923 mm Turning length: 1250 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 4   CNC Brand: _Unknown / Other CNC Model: mAPS msx 850 III MACH-id    4462 MAKE         Mori Seiki Japan TYPE            NL 2500 Y 1250 YEAR           2008 SPECIFICATIONS Swing over bed    923 Swing   755      Distance between centres         1250 Power kW  live tools        5.5 X Axis       260 Z Axis        1345 Y Axis mm      100 C Axis         360.000 Control       MAPS MSX 850 - III Chip conveyor         Yes Tool eye     Ye ...

Turning diameter: 680 mm Turning length: 1500 mm Turret positions: 0 CNC Brand: Fanuc MACH-id    4203 MAKE         Mori Seiki TYPE            SL 35 MC YEAR           1996 SPECIFICATIONS Swing over bed Ø     680 mm Control             FANUC Swing over cross slide       425 mm Distance between centres    1500 mm Spindle bore        92 mm Spindle speeds / ranges        2500 Rpm Power        37 Kw DIMENSIONS Length      6000 mm Width        2500 mm Height       2500 mm

Turning diameter: 680 mm Turning length: 1500 mm Turret positions: 0 CNC Brand: Fanuc MACH-id   4204 MAKE        Mori Seiki TYPE          SL 35 MC YEAR         1997 SPECIFICATIONS Swing over bed Ø       680 mm Control        Fanuc Swing over cross slide      425 mm Distance between centres     1500 mm Spindle bore      92 mm Spindle speeds / ranges      2500 Rpm Power      37 Kw DIMENSIONS Length      6000 mm Width        2500 mm Height       2500 mm  

Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...