描述: |
挤出生产线 Keller CFE-699-A-04
二手机
Single screw degassing extruder CFE-699-A-04 for polymers manufactured
by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The
extruder has the following parameters: Overall dimensions of the
extruder, taking into account the gearbox and motor - length 12
meters, width -2.5 meters, height -1.5 meters, the total diameter of
the casing with a heating-cooling jacket is 950 mm, the diameter of
the screw is 600 mm, screw length -7800 mm. The average screw speed is
22-25 rpm. The total weight of the extruder without spare parts is 40
tons. The working pressure in the casing is up to 300 bar, the working
temperature of heating the melt is up to 300 degrees. The casing of
the extruder is heated by high temperature oil supplied to it.
The average productivity of polymers is 50-100 tons per hour. The
extruder is equipped with a parallel reducer of POWER-TECH
INTERNATIONAL (FOOT-JONES) type 2503-HLE, an explosion-proof SIEMENS
355L 250 kW electric motor with forced cooling, and a magnetic
coupling DYNAPAR 53Z. The extruder comes with a spare working screw
and a full set of spare parts and automation. The extruder can be used
for the following types of industries: 1. Industrial production of
various types of pellet products and polymer wastes. 2. Industrial
production of terrace boards and other products E561673 from
wood-polymer composite. 3. Industrial production of peat pellets,
sawdust or their composites. 4. Industrial production of resins and
peat waxes from peat. 5. Industrial production of synthetic rubbers
and their derivatives. 6. Briquetting feed. 7. Industrial use as a
press for non-edible oils. 8. For pumping resins and other highly
viscous substances (in this case, the capacity can be increased up to
200 tons / hour). 9. Pulp production.
In the presence of 2 pcs, almost never been used, the operating time
is about 50 hours. seller offer No. resale P00131151
|