描述: |
GRAMEGNA 热收缩膜包装线 INTERPLAST GRAMEGNA UE98069
二手机
Interplast GRAMEGNA brand that for over half a century has been
operating on the heat-shrinking machinery market and is well known for
the high quality and reliability of its machines.
We sell our R-700 type shrink wrapping packaging machine. The
equipment is in excellent condition. The machine has only been stored
since the end of 2004.
In 2004, we stopped producing soft drinks. We did not sell the machine
because we planned to restart the activity.
There are electrical drawings for it.
Production capacity: nominal 20-25 packages
actual 21-23 packets/min
For 2 liter bottles, from the 4×2 format, according to a preliminary
estimate, approx. 21 packages/minute.
The machine consists of the following main units:
1 intro conveyor belt with bottle sorter for arranging bottles
arriving in one row into several rows for bottles with round and
square cross-sections
1 x Champion 4 HS-type packaging unit, which works with a welding
arm
1 shrink tunnel furnace
1 control and regulation unit mounted on the machine frame
Multi-row bottle sorting unit:
A conveyor belt with a low friction factor, which sorts the bottles
coming from the filling unit through appropriate diverting
channels.
The device is suitable for receiving bottles with a rectangular
cross-section and sorting them according to the desired package
format.
The belt is driven by an electric motor with adjustable speed.
The loading of the conveyor belt is accompanied by a separate sensor
according to the rhythm of production and automatically controls the
progress.
A sensor unit monitors possible bottle congestion and automatically
regulates the production rate.
A terminal with a digital display performs the programming and control
of the following functions:
- continuous display of the production rate
- alarms indicating possible faulty operation, giving the necessary
instructions to overcome the error
Packaging unit
According to the size of the bottles, the size of the film welding
arm: 700 mm, equipped with a safety device, the passage space under
the arm is 380 mm
Dimensions of the heat-shrinkable polyethylene film roll:
Width 680 mm, diameter 350 mm, thickness 35-100 microns
t is equipped with an upper and lower automatic film feeder. The lower
one is placed on an extendable slide so that the roll change can be
easily done on the operators side.
The end of the film roll is E561673 indicated by sound and light
while the machine stops.
The inner dimensions of the tunnel are 600×400 mm surrounded by a
multi-layer thermal insulation cover.
Its heating is provided by Kanthal wire drawn in a hermetically sealed
stainless steel and heat-resistant pipe.
The uniform temperature distribution is created by forced flow
produced by a fan.
The air flow is regulated in such a way that the return flow of hot
air is ensured.
The air flow is regulated in such a way that the return flow of hot
air is ensured, thereby minimizing heat losses.
The installed power is 38 kw.
The finished packages are placed on a table with rollers, the width of
the rollers is 200 mm.
The solidification of the film is ensured by a fan-operated end cooler
blowing cold air.
3 meter long gently sloping parcel conveyor and collecting roller
table with parcel stop.
Technical parameters
Supply voltage 380 V/50 Hz 3 phases + ground
The height of the conveyor belts measured from the floor is 1050
mm seller offer No. resale P220805022
|