| 描述: |
CNC Nestingmachine INFOTEC 4621 EVO GO
new CNC Nestingmachine,
Brand: INFOTEC
Type: 4621 EVO GO
Technical data:
Working range X axis: 2150 mm
working range Y axis: 4600 mm
Working range Z axis: 250 mm
X / Y axes speed: 60 m/min
Z axis speed: 12m/min
Drill head grid 32
12 vertical spindles
8 horizontal spindles
1,7 kW
System INFOTEC - EVO GO
Automation of horizontal drilling in 18 mm panels (patent pending)
Lateral drilling zone (requires drilling unit 12/8/2 LL)
- Special unit for the C axis, which allows the transfer of the cut
workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis
required)
Optional:
- Extension of the working area in the Y-axis up to 4600 mm.
(Total length of the machine set with unloading table for EVO GO is:
9100mm).
- Lateral drilling range:
X: 2150 mm, Y:1300 mm
Dimensions of side drilling elements:
- 1600 x 600 x 18 mm - maximum,
- 500 x 80 x 18 mm - minimum
Milling cutter HITECO 8,5 kW
Pneumatic opening HSK63F
Main spindle Power kW 8,5
Adjustable revolutions main spindle rpm 1.000 / 24.000
Cooling main spindle by fan
Automatic tool changer (moving on the X axis)
Automatic disk tool changer with 16 tool change positions
Tool length sensor
Preparation for assembly of drilling units
Mechanical, pneumatic and electrical preparation
for mounting of drilling heads type T5, T9, TFC 8/8/2, TFC 12/8/2
Software and Hardware:
PC Windows current version
Lcd 24
Hardware PC HP
Controller TPA WSCM
Keyboard and optical mouse
USB drives read and write
Network card for internet connection and remote maintenance
Software Cad-Cam TPA CAD Professional 64 bit parametric version
Software TPA Nesting
Software Wood System Control as lists to run programs.
Software INFOCAM Cabinet CAD/CAM required for the selection of the
parts for lateral machining (article underprice AIT00003, if not
required)
Work table with accessories
The automatic sliding system consists of elements such as: a stripping
arm, lateral bases and a central table cleaning system.
The stripping arm allows to position the material in the Y axis and to
quickly push the finished parts to the pick-up field. The lateral
bases (digitally and pneumatically controlled) position the material
in the Y-axis. In addition, individual units can be positioned in the
X-axis by means of two pneumatic pins. The sliding process is
connected to the cleaning process of the working area via central
cleaning systems. The use of the system in a CNC machine has a
definite impact on the efficiency of the production process and
reduces dust throughout the plant.
Incl. automatic lubrication guides / bearings / ball screw
Vacuum system
Smooth table with dimensionally stable phenolic resin plates
6 vacuum zones; electro-pneumatically controlled
2 vacuum pumps 250 m3/h
Extension of the X-axis
The extension of the X-axis (machine door) is required for the
installation of additional machine accessories such as drilling units,
oscillating knives, etc. By widening it, you can increase the reach.
The extension of the X-axis is also a good solution for customers who
are thinking about extending their machine with additional accessories
in the future.
Raising the Z axis to 350 mm
to increase the working distance on the CNC machine. Increasing the
clearance increases the production capability of the machine in the
field of machining high elements, such as 3D molds. For a number of
accessories, W514335 such as drilling coolers, etc., it is necessary
to raise the Z axis.
Pick-up table for finished elements
The pick-up table enables automatic pick-up of the waste material from
the table, which is pushed through the frame cleaning - scraping.
The pick-up table enables the pick-up of material in the format
2800x2070mm. The aim of this solution is to maximally accelerate the
processing cycle - it requires the purchase of a system of pushers.
Positioning system
4 additional mechanical 0 points
Standard machine set with 6 base points (depending on the version),
pneumatically activated. The mechanical bases integrated in the
machine table allow fast and repeatable placement of workpieces on the
table. Digitally activated and pneumatically retractable steel pins
are a reliable method of placing materials at right angles. They
provide precise and repeatable positioning. The positioning elements
are made of the highest quality steel and are equipped for the rigors
of continuous use.
4 additional pins increase the possibility of placing the elements on
the machine table.
Safety device
CE standard fencing + laser gate on one side
The machine is equipped with a fence according to CE standard and a
high quality class IV laser gate on one side.
For machines with working field length over 4000 mm, individual
pricing is required.
Automatic labeling of barcodes
Automatic labeling of the parts on the machining table
seller offer
No. resale 1110244
|