描述: |
封边机 Holzkraft minimax me 40 tr s
新机
Pre-milling unit: yes;
Pre-milling unit material removal: 0 - 2 mm;
plastic edges: 0,4 - 3 mm;
solid wood edges: 0,5 - 5 mm;
Workpiece thickness: 8 - 50 mm;
Minimum length of workpiece: 120 mm;
Min. work piece width: 110 mm;
Anti-adhesive spraying unit: yes;
Edge preheating device: yes / with ceramic infrared lamp;
Bonding unit: granulat / Glue container quick-change kit;
Jack knife: yes;
Flush trimming unit: yes;
Corner copy unit: yes;
Flush radius milling unit: yes;
Radius scraper unit: yes;
Area scraper unit: yes;
Buffing unit: yes;
Cleaning spray unit: yes;
motor power: 5 kW;
machine length: 3774mm;
machine width: 1546 mm;
machine height: 1337mm;
weight: 842 kg;
Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large
touchscreen: - HMI Maestro Active Edge - Graphic display of
all processing units and their operating status - Graphic
simulation of the machining operations - Control of all
processing units - Regulation of the glue pool temperature -
Assistance functions for setting up the machine according to the
machining program - Fault diagnosis for quick correction of
simple errors - Statistics on machining parameters - USB
port - Preparation for network connection - Excellent
accessibility to the working units thanks to the large hood that
ensures protection and noise reduction - Automatic aggregate
positioning when changing plate thickness - Plate feed by
conveyor with rubber sliders - Quality Made in Italy
Equipment details
10 touchscreen control panel -
Optimal machine management due to the new 10 touchscreen control panel
with Maestro active edge on which all machine functions are displayed
graphically
Premilling unit - Two slide cutter
Gluing station - The glue is heated quickly and evenly by
heating rods located both in the glue pot and in the glue application
roller - Automatic temperature reduction when the machine is in
idle for longer - Teflon-coated glue container for easy glue
replacement - Device for recycling of unused glue -
Automatic application of roll edges with cutting knife for edges up to
3 mm - Turntable with Ø 730 mm - Self-lubrication of the
glue pot - Kit for quick change of the glue container
Flush radius trimming unit - With sensing rollers in horizontal
and vertical direction for optimal tool positioning - Equipped
with combination milling tool Ø 55.3 mm for flush milling of edges
up to 5 mm and radius edges up to 2 mm - Precise setting via 2
digital displays - With chip exhaust
Surface
scraper - Absolute cleanness for the perfect finish of workpiece
surface - With rotating copy device
Buffing unit - Drive via two independent swivel G545000 and height-adjustable
motors - For perfect cleaning and polishing of the panel edges
Radius scraper - With numerical position display -
For the perfect finishing of plastic edges - With device for
retracting the unit when it is not needed
Edge magazine - For automatic application of strip edges - Solid wood strip
edges are automatically loaded and synchronized with the panel
guide
Available as an option: Grooving unit - Allows
gluing and grooving of the workpiece in one pass - Installation
only possible as an alternative to buffing unit 5514560
Milling unit (me 40 tr s) - For capping the edge, as well as
for radius milling on the top and bottom side - The radius cutter
is used to trim the edges when solid wood edges are glued - High
frequency motor with 12.000 rpm; saw blade Ø 125 mm Z12
Sprayer for finishing the edge - For pre-cleaning of the panel
surface and edge for more effective cleaning
Cross-cut unit
(me 40 tr s) - For capping protruding edges
Rounding
unit (me 40 tr s) - For rounding the edges - High frequency
motor with 12,000 rpm; cutter Ø 58 mm Z4 seller offer No. resale
1527
|