描述: |
jig grinding machine HAUSER S50-DR
Description: Year of construction: probably 1986 Adjustment
range: In the X-axis (table slide): 900 mm In the Y-axis
(sanding head): 600 mm In the W-axis (moving crossbeam): 635
mm Feed speed: In the X- and Y-axis, direct current drive,
infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase
drive: approx. 800 mm/min Measured value display: Smallest
display unit: 0.001 mm Zero point can be selected as required
Positioning accuracy (basic deviation X, Y): 0.004 mm Table:
Usable table surface: 1020 x 860 mm Permissible table load: max.
800 kg Width of the T-slots: 14 mm Number of T-slots: 7
Distance between the T-slots: 100 mm Working range of the sanding
head: Grinding spindle speeds, infinitely variable with electric
motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000
rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke
of the grinding spindle sleeve: max. 180 mm Diameter of the
grinding spindle sleeve: 100 mm Radial infeed of the grinding
wheel: 6 mm Weight compensation of the grinding spindle sleeve:
pneumatic Capacity: Cylindrical grinding (with wheel)
diameter: 100 mm Without intermediate plate: max. diameter 230
mm With intermediate plate: max. diameter 360 mm Sanding
S624454 length Z (with mandrel): max. 125 mm For further technical
data see pictures With technical documentation as shown in the
pictures With accessories as shown in the pictures, including 2
air turbines (types: T10 and T16) Type T10: Speed range:
depending on air pressure 75000 - 100000 rpm Type T16: Speed
range: depending on air pressure 120000 - 160000 rpm With motor
for groove grinding and other accessories (see pictures) weight
approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x
2,300 x 2,900 mm seller offer No. resale 905334
|