研磨机修整机（磨床） GERD WOLFF VKUE 500

金属加工设备 / 磨床 / 研磨机修整机（磨床）

加入备选清单

发送询价

打印视图

产品编号: 160354016	数量: 1	日期： 23.04.2024
生产年份: 新机

价格:	请求报价
生产厂家:	GERD WOLFF
型号:	VKUE 500
机械类型:	研磨机修整机（磨床）
描述:	研磨机修整机（磨床） GERD WOLFF VKUE 500 新机 charge load: / : / weight: 720 kg diameter: 1360 mm height: 1200 mm 0: 520 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in the part by keeping the process time in minimum. The O-shaped design of the bowl is designed by considering vibration optimization and optimal kneading motion. The bowl is made of special steel and has a tension-free and vibration-resistant welding structure. The chassis height and springs are ergonomically designed so that staff can work with high efficiency. Its resistance against vibrations has been increased, with rigid and reinforced support construction, adjustable insulators flexibly mounted to absorb vibrations are some of the design features of the machine chassis. Long-lasting special motor series is used which have CE and Ex standards, high performance, cast-bodied, hollow roller bearings and it does not require lubrication. Inside of the bowl is covered with 90 Shore polyurethane material which is resistant to abrasion. In this way, a long service life is achieved without requiring repair and maintenance. Makinalarimizda açip kapatmasi kolay tas bosaltma bölümü bulunmaktadir. Our machines have a chip unloading section that is easy to open and close. Electrical panels with CE Certificate, designed in A625483 accordance with EU standards, are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. Optionally, dosing pump control, speed control unit, valve control unit etc. can be added to the electrical panel. It can work integrated with automation systems with PLC software There are clean water inlet and waste water discharge valves. If preferred, standard water valves can be replaced as solenoid valves. In this case, valve on-off control can be done from the electrical panel. The dosing pump mounted on the machine is installed as standard. The dosing pump automatically sprays the chemicals used in the process in desired periods. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. seller offer No. resale 2065-H1140
是否为库存:	是
Seller-item-No.:	2065-H1140