描述: |
型钢剪板机 GEKA Semipaxy 1000x400 mm B&R 15
新机
: neu : ca. 10 Wochen ab Auftrags : Spanien : 24100
€ : 1000 mm : 400 mm : 12 m/min : 0,2 mm : 0,1
mm : 300 kg The Semi Paxy table is a positioning unit with CNC
control unit which may be factory fitted onto any GEKA punching
machine with a 500 mm or larger throat.
THE ASSEMBLY CONSISTS
OF:
Mounting plate. Table assembly with X” and Y”
axis driven by servo motors. B&,R Power Panel 500 PC based
15” touch screen control Each axis X” and Y” has servo
motors with built encoder for precise measurement. Electric
cabinet
THE WORK PROCESS IS AS FOLLOWS:
The
position of the holes to be punched is programmed either in absolute
or incremental dimensions. When the control is started up, the
guide stops are positioned for first hole. The material to be
punched is placed against guide stops and the punching pedal is
activated, the ram then cycles. After the punch has returned to
the pre-set clearance height, the table guide stops move to the next
programmed position. Repeat this sequence until all holes are
punched.
B&,R PC BASED 15” TOUCH SCREEN CONTROL MAIN
FEATURES:
B&,R Power Panel 500
Integrated keyboard Windows embedded operating system
15” colour touch screen WXGA resolution Compact Flash
Memory. USB front port Ethernet port Easy and user
friendly interface Programming is made through Line Pro software
developed by Geka Importing of dxf/dstv files Network
connectivity Remote assistance via the internet
Run,
design, jog, configuration and alarm modes
ELECTRIC
CABINET
Electric cabinet containing power and control
equipment for the axis positioning and control of the machine
Includes Allen-Bradley Guarmaster® safety relays Electric
cabinet is mounted inside Hydracrop’s or Puma’s frame. If machine
is retrofitted, the electric cabinet is mounted out of the machine’s
frame. Standard input power is 400 V - 50 Hz - 3 phases. In case
different input requirement is needed, let us know
LINE PRO
MAIN FEATURES:
It is a visual and a H61606 very easy to
use application with graphic representations. It shows the
operator the image of the piece that is being designed. All the
process of the part (from designing to manufacturing) can be done and
controlled directly from the Positioning Control. Importing of
dxf and dstv files available according to designing specifications
of the software. It is easier to make changes on holes that have
been already designed and the operator can easily identify any mistake
on the part, as he is watching physically on the screen all the steps
of the process of manufacturing of the part. Line Pro can be
installed in a PC for later on sending the file via the network or
with a USB stick to the machine
Other X- and Y- ranges
are also available, please ask for an offer.
The
data for this ad was created with ModulMWS - the software solution of
LogoTech oHG.
seller offer No. resale 1069-905
|