描述: |
型钢剪板机 GEKA ALRS 600
新机
: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700
€ : 6000 mm : 40 mm : 6000 mm : 600 kg : 180
mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat
bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and
Hydracrop 110 dual cylinder ironworkers. This system is ideally
designed for shearing desired lengths and quantities of flat bars up
to 600x15 mm and 6 m length.
THE ASSEMBLY CONSISTS
OF:
Drive roller with hydraulically controlled pinch
roller. Servo motor with linear encoder. B&,R Power
Control 500 10”user friendly touch screen control mounted in a
control cabinet. Positive hydraulic clamping. Fix guide
rollers. Manually adjustable straight guide rollers. 6m
roller bed conveyor. Electric cabinet
THE WORK PROCESS
IS AS FOLLOWS:
Place the flat bar on the rollers
Adjust the lateral rollers to the width of the flat bar Clamp
the material with the hydraulic hold down Run the program
previously generated through Geka´s Line Pro software.
The
machine will automatically feed to length and automatically will
shear
B&,R PC BASED 10” TOUCH SCREEN CONTROL MAIN
FEATURES: The unit consists of an industrial type PC control
mounted in a console. It incorporates a touch screen monitor with
an intuitive and extremely user friendly interface developed by
Geka for ease of navigation through all stages of operation.
B&,R Power Panel 500 PC control Intel® Atom™ Architecture
advance One axis control unit. 10” color touch screen
XGA resolution B&,R 2 Gb Compact Flash Memory for data
storage. USB front port Ethernet port for network
connectivity Easy and extremely user friendly interface
developed by Geka Programming is made through Line Pro software
developed by Geka Importing of dxf/dstv files Run mode
displays layout of the part as it is being punched or spotted
Run, design, jog, configuration and alarm modes Speed percentage
control of the ",X", axis via the touch screen potentiometer
dial Jog mode for calibration of axis, manual control of the
axis forward and back, and go-to mode for manual shearing.
On-screen diagnostics of PLC input/outputs as well as the X driver,
for ease of troubleshooting the system. Set-up features include
selections of multiple languages, inches or millimeters, type of
machine, and ",X", min/max adjustments.
ELECTRIC
CABINET
Electric cabinet containing power and control
equipment for the axis positioning and control of the machine
Includes Allen-Bradley Guarmaster® safety relays H61606
Electric cabinet is mounted in the same console as the control is
located. Standard input power is 400 V - 50 Hz - 3 phases. In
case different input requirement is needed, let us know
ALRS
600 MUST BE FITTED ON A FACTORY BUILT HYDRACROP 80 OR HYDRACROP 110
MACHINE THE ABOVE PRICE DOES NOT INCLUDE HYDRACROP
MACHINE
OPTION:
LINE PRO SOFTWARE:
Offline license included to be installed in a PC for later on
sending the files via the network or with a USB stick to the
machine It is a visual and a very easy to use application with
graphic representations. It shows the operator the image of the piece
that is being designed. Designing parts with a visual layout of
the plate and shear pattern Automatically optimizes the shearing
sequence with the ability to also manually change the shear
sequence. Creates manufacturing sheets of the parts for hard
copy printouts Importing of dxf and dstv files available
according to designing specifications of the
software.
The data for this ad was created with
ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1069-885
|