描述: |
多刀片锯 FOD DPPA-II-50-E
二手机
Multisaw Edger FOD DPPA-II-50-E with lasers
– production in Poland
– DTR
– fixed sleeve
- cutting height 120 mm
- cutting width 500 mm
- engine power 30 kW
- material width max 730 mm
- four types of feed speed
- power of the feed motor 4 kW
- spindle diameter 55 mm
- sleeve diameter 90 mm
- electric disc spacing adjustment
- fixed edging sleeve 60 mm
- one movable shield
- two rows of anti-recoil pawls
- three lower pulling rollers
- two upper pulling rollers
- two lasers
- shaft support
Transport dimensions:
250x165x220 cm
weight ~ 2000 kg
Multisaws are machines used in the wood industry mainly for cutting
prisms, but not only. Machines of this type can cut boards into
smaller elements and cut lamellas. The principle of their operation is
very simple, the machine has a spindle located in the central point,
in the horizontal axis, on which tools in the form of discs are
mounted. Depending on the purpose, weilopsaws can have one or two
spindles. In the latter case, the device has greater cutting
capabilities, mainly comparing the thickness of the material. An
additional advantage of machines with two rollers is obtaining a
smaller kerf. The next main division of machines is the method of
material feed. They can be separated into shaft feed and crawler feed.
E661673 When cutting the saw with shaft feed, the material is moved
through the upper and lower shafts, depending on the construction,
they can be driven all or only the lower ones. In turn, devices with a
caterpillar move the wood with it, and the rollers placed in the body
press the material against it. The selection of the right machine
depends primarily on the intended use. It should be considered whether
only elements for pallets or boards made of expensive exotic wood will
be cut. All of these can influence the choice of machine. seller
offer No. resale P230302096
|