描述: |
窗户上色设备 FINITURE Pro Flow Impraegnieranlage
二手机
Length: 2700 mm Width: 1100 mm Height: 850 +- 150
mm engine output: 0,37 kW Electric capacity: 0,5
kw compressed air: 6 bar Horizontal impregnation system Pro
flow for individual parts with rinsing
circuit. --------------------------------- Features:
Machine for horizontal flooding of individual parts. The product will
go through flooded a row of nozzles. The excess product is then
removed through air jets blown off. The pump and the air
nozzles are controlled automatically and only then operated when
the workpiece passes through. In this way the Compressed air
consumption reduced. The circulation operation ensures
minimal product
consumption. --------------------------------- Construction
features: structure Sturdy steel frame, painted with
high-strength, water-soluble products. Machine body made of
heat-sealed, thick polypropylene plates. 4 independent chambers
for inlet, flooding, blow-off and outlet.
Horizontal feed of
the workpieces By motor-driven rollers made of plastic with
grooves. Electrical converter for controlling and changing the
conveying speed.
transmission The machine is equipped
with an exclusive system so that all Gear located outside the
flood chamber and easily accessible to the Operators are to
guarantee a longer service life and the to facilitate maintenance
operations. The moving components are protected by cover plates
and appropriate seals protected. circulation
pump Pneumatic double diaphragm pump made with valves, seals and
diaphragms Nitrile rubber and housing made of plastic material
(PVDF).
air jets A blow-off system is present in the
first chamber to prevent product leakage avoid. A second
blow-off system after the flood chamber blows off the excess
product from the workpiece.
Electrical
panel According to CE, degree of protection IP 55. Including
inverter to the set feed rate.
technical
features Length mm 2700 Width mm 1100 Conveyor speed
(min./max.) m/min 3-6 Motor power train group kW
0.37 Installed electrical G612123 power kW 0.5 Distance
between infeed and outfeed rollers mm 2520 Working height
(adjustable) mm 850 +- 150 Min. length of the workpieces to be
flooded mm 250 Max. width of the workpieces to be flooded mm
300 Max. height of the workpieces to be flooded mm
250 Compressed air consumption lt/min 2000 Pressure of the
required compressed air bar 6
Equipment and available
accessories Flushing circuit for Pro
Flow --------------------------------- Price of the above
machine: on request!
plus packaging and
transport --------------------------------- (Technical
information according to the manufacturer - without guarantee!
Illustrations may be dated Deviate from the original, prices
net, plus VAT (domestic))
The data for this
ad was created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-6801
|