描述: |
折弯机 - 液压 FARINA PFO 130/30
新机
pressure: 130 t chamfer lenght: 3150 mm distance between
columns: 2600 mm engine output: 15 kW control: CYBELEC
VisiTouch weight of the machine ca.: 10900 kg dimensions of
the machine ca.: 3990x1750x2900 mm Domestic equipments: -
DELEM DA66T - 2D CNC control with LCD color display for control of
7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 =
horizontal movement of the backgauge X3 = horizontal movement of
the stop finger / inclination R = vertical movement of the
backgauge Z1-Z2 = lateral movement of the stop fingers
-
Top Dead Center - Speed changeover point - bending end -
Deactivation point of the safety light barrier - Retreat
stop - CNC controlled proportional pressure control - conical
bending - USB port - DFC stator suspension compensation -
Motorized back gauge model AS with 5 controlled axes - X-axis:
1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm
stroke - Hydraulic upper tool clamping make Wila, type: Premium
NSCL-II-HC - Manual Unterwerkzeugklemmung, make Wila - Incl.
Tools: sectioned, hardened and ground: Upper tool: Type: Wila
BIU-021 Lower tool: Type: 4-V - Hydraulic
compensation
- Platinum Package consisting of: Active
dynamic crowning Compensation of the stator suspension Sheet
thickness measuring system diagnostic module
- Active
dynamic crowning device: Constant angle over the entire
length Complete management of the crowning fully
automatic Constant angle on the sides and in the middle No
speed reduction The system works automatically and is almost
invisible, no additional equipment required
-
Compensation of the stator suspension Bending sheet metal plates
of different lengths without that The program parameters need to
be changed. Bending of notched or perforated sheets
without The program parameters need to be changed. Possibility
of parts to work with reduced dimensions then test the workpiece
with the actual dimensions without having to change the program
parameters. No speed reduction during processing. The system
works automatically and is almost invisible, no
accessories required.
- Sheet thickness measuring
system Increased accuracy Fully automatic system Less
waste Control of the material No speed reduction The
system works B646911 automatically and is almost invisible, no
accessories required
- Soft start system Start / Stop to
save energy - Control cabinet cooling - Hydraulic parts from
Hoerbiger and Denison - Electrical parts from Rockwell Automation,
Allen Bradley, Schneider, Siemens, Delem - Cabinet lighting
through a LED strip - Machine lighting behind the machine with 2
LED strips - Footswitch - Laser safety system DSP AP MSC with
height-adjustable Special arms. The system allows a speed change
of only 2 mm from sheet metal and optimizes cycle times and
maximum safety. - 2 front support arms (500mm): laterally movable
and manually height adjustable by handwheel. - side and rear
safety devices - Service key - Operating instructions and
maintenance manual - Machine without oil - Machine according
to standard 2006/42 / CE and CE
certificate
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1123-4021102
|