描述: |
填充整体 Enoberg Evf 24-24-6 N S
二手机
Enoberg Bottle Filling Monoblock for still water This used Bottle
Filling Monoblock model EVF 24 24 6 N S comes with an integrated
rinsing filling and capping system and consists of A rotary rinser
with 24 nozzles for the rinsing of bottles A rotary filler with 24
valves for the electronic volumetric filling A capper with 6 heads for
the application of plastic screw caps or pressure caps Monoblock
Bottling with a machine pitch of 150 72 mm Counterclockwise machine
Neck Handling bottle conveying system Key features The Enoberg Filling
Monoblock for still water distinguishes itself with its compact frame
which considerably simplifies operations to manage clean and maintain
the machine and ensures substantial savings on space Filling module
equipped with electronic meters to ensure precision The working space
of the machine is entirely made of stainless steel and glass ensuring
a high standard of hygiene All the piping systems can be disinfected
suitable for use with foodstuffs The optimal disposition of carousels
within the frame allows the reduction of blind spots which then gives
a great advantage for productivity Neck handling system for bottle
conveying inside the machine Transmission with toothed wheels Rinsing
module Rotary rinser with a single treatment and fixed nozzles for the
inner cleaning of bottles Mechanical grippers for bottles neck
handling Neck handling system for one format Bottles that overturn by
twisting Manifold for the distribution of rinsing liquid and blowing
air to the nozzles No bottle no spray system Rinsing treatment by
water and final drip or blowing by air and deposit Pressure switch to
stop the machine in case of treatment product pressure reduction
Stainless steel frame Bottle Filling Monoblock arranged in advance for
closed circuit CIP complete with manual dummy bottles CIP unit not
included Filling module Volumetric filling based on electronic meters
magnetic or mass meters on the base of the machine configuration
Operation details Opening of the filling valve by means of an electric
drive controlled by the signal of the bottle presence sensor opening
and by the corresponding signal of the counter closing Contactless
filling process between the bottle and the filling valve Volume is set
up in the operator s control panel The product feeding tank is placed
outside of the machine readily accessible for inspection Bottle
Filling Monoblock complete with a pneumatic valve for product infeed
level control spray ball a pump that sends the product to the filling
valves and an automatic metering system Product feeding pump if
installed controlled by inverter keeping constant pressure on the
filling valves Central distribution manifold A small sized central
manifold distributing the product from the main feeding pipe to the
filling valves Filling valves central manifold and distribution pipe
made of stainless steel AISI 316 Sealing rubbers comply with food
industry regulations Bottle centering system The bottle centering was
placed beneath the filling valve without the need for bottle lifting
jacks Reducers for meter control mounted on the carousel ensuring easy
access and reduction of cables one reducer every two meters Bottle
Filling Monoblock U654234 for still water pre arranged for closed
circuit CIP only for EVF models complete with manual dummy bottles CIP
unit excluded Capping module and optional cap orientating feeding
system Capping turret suitable for the application of plastic pressure
caps or screw caps pre threaded caps Cap feeding system is placed
outside the Filling Monoblock for still water centrifugal or water
fall feeding system which delivers the caps This is properly oriented
to the used filling triblock feeding channel Cap distribution from the
descent channel to the capping heads by means of a pick and place
device Screw heads with magnetic closing system with the possibility
to adjust the locking torque in case of screw caps or pressure heads
with a dedicated terminal in case of pressure caps Motor reduction
gear is driven by an inverter for independent control of head rotation
for screw caps Bottle Filling Monoblock Main structure Drive motor and
transmission systems placed in the upper base fully insulated from the
working environment Transmission of the Filling Monoblock for still
water with toothed wheels Height adjustable machine output conveyor to
suit different bottle sizes in case of Neck Handling machine Safety
metal shield with window style sliding doors equipped with magnetic
[...for more information send your inquiry to the seller.] refno:
M180 seller offer No. resale M180
|