描述: |
多刀片锯 Cosmec SM 400
二手机
Cosmec SM 400 multi-saw
- after the technical review
- very good condition
- Italian production
- year of production 1993
cutting width 400 mm
cutting height 160 mm
engine power 37 kW
smoothly adjustable feed speed
spindle diameter 55 mm
sleeve diameter 70 mm
four rows of anti-recoil pawls
the three upper pressure rollers
table width 710 mm
minimum element length 700 mm
shaft height adjustment
guide ruler
laser
central lubrication
spigot diameter 200 mm
dimensions of the machine (length / width / height) 220/190/180 cm
weight 1800 kg
Multirip saws are machines used in the wood industry mainly for
cutting piles, but not only. Machines of this type can cut boards into
smaller elements and cut lamellas. The principle of their operation is
very simple, the machine has a spindle located in a central point on
the horizontal axis, on which tools in the form of discs are
installed. Depending on their purpose, weilopaws can have one or two
spindles. In the latter case, the device has greater cutting
possibilities, comparing primarily the thickness of the material. An
additional advantage of the machines with two shafts is the lower
kerf. Another major division of machines is the method of material
feeding. They can be separated into shaft feed and track feed. When
E661673 cutting the saw with a shaft feed, the material is moved
through the upper and lower shafts, depending on the design, they can
be all or only the lower shafts. In turn, devices with a caterpillar
move the wood with its help, and the rollers located in the body press
the material against it. The selection of the appropriate machine
depends primarily on the intended use. Consider whether only the
pallet box elements or boards made of expensive exotic wood will be
cut. All of this can influence the choice of the machine. seller
offer No. resale P211014157
|