| 描述: |
Foam Injection Installation + Panels Press CANNON AFROS A-Compact 100 FC
二手机
Description: The foaming machine described below is designed for
foaming sandwich elements.
PRODUCT
Panels for cold rooms
DIMENSIONS
Length
x width
max. 2,400 x 1,350 mm
min. 600 x 180 mm
Thickness:
40 ... 120 mm
CAPACITY
Press type: 2 +
2
Press table dimensions: 6,500 x 1,600 mm
Number of press
tables: 4 pieces ,
Occupancy of press table: 1 piece
Extension of pressing tables: 60 sec
Curing time / dwell time in
the press: 15 - 45 min
Occupancy rate: 0.9
Shifts: 2
pieces ,
Working time per shift: 8 h
Panels per shift:
48/72 pieces
Depending on foam thickness and raw material
GROUND DATA (this set-up)
Mixing ratio: 100
: 140 (polyol : isocyanate)
Dosage - max: 1100 g/s per mixing
head
Specific gravity: Polyol 1.0
Isocyanate 1,2
Density:
45 - 60 kg/mÑ
Start time: 20 sec
(Other raw material data can
of course be used for other applications)
SYSTEM
COMPONENTS
Components of the system are,
- Container station with collecting tray and feed pumps
- High-pressure foaming machine type CANNON A-Compact 100 FC
The foaming machine is equipped with two Cannon FPL 18 HP
mixing heads for feeding the mixture into the closed mould.
- Panel press S624454 type PMC 188 - 2+2 / 6,500 x 1,600 mm
- Machine platform for holding all wet part elements as well as the
control unit and hydraulic unit of the press
- Hose line and
pipework as a connection between the foaming machine and mixing
heads
- Mixing head manipulator - motorised support over the
entire length of the press
- Mixing head manipulator -
motorised support over the entire length of the press and swivelling
manipulator for foaming housings
- Documentation in
German ,
TWO PANEL PRESS TYPE CANNON PMC 188
T
SY
seller offer No. resale 903880
|