描述: |
激光切割 BYSTRONIC Bysprint 3015 Bylaser 2200
二手机
CNC laser cutting Bysprint 3015 Bylaser 2200 used very little, only
for prototyping.
Working range:
X-axis - 3000mm
Y-axis - 1500mm
Z-axis lift - 70mm
Machining accuracy:
VDI 3441 machining tolerance ± 0.1
Finding tolerance ± 0.05
Edge detection accuracy:
Detection tolerance ± 0.05
Finding tolerance ± 0.2
Load bearing capacity:
Interchangeable lifting table 890kg
Fixed plate table 3500kg
Power supply to the machine:
Three-phase, + PE 50/60Hz electrical connection.
Machine: cos. 0.91 , 100AT , 4 poles 3x400/480V
Air emission filter: cos. 0.8 , 25AT , 4 poles 3x400/480V
Cooling water:
Water flow rate 95
Water starting temperature 19°C
Water temperature constant ± 1 K
Impurities <50
Maximum allowable conductivity value <6000
Cooling water pressure 4-5 bar
Laser machine air:
Minimum inlet pressure 6 bar
Maximum machine consumption 20 Nm³/h
Maximum particle density 5mg/m³
Maximum residual oil content 0.1 mg/m³
Condensation point under pressure 3°C
Air emission E661673 filter device: (Keller)
Minimum inlet pressure 6.5 bar
Maximum filter cleaning consumption 10 Nm³/h
Process gas
Fitting outer diameter 12mm
Primary pressure N2 dynamic 1100l/min 25 bar
Primary pressure O2 dynamic 400l/min 18 bar
Dimensions and weights.
Base frame with table 4.6 x 2.2 x 1.1 Weight 4800kg
Trolley and deck 5.1 x 0.8 x 1.3 Weight 800kg
Protective door 4.0 x 2.0 x 0.3 Weight 250kg seller offer No.
resale P240131006
|