| 描述: |
Baler with REFUSE ram and HARDOX floor BOA 2100 75 (8) PR SD
二手机
Technical data baler:
Manufacturer BOA
Type 2100 75 (8) PR
SD
Year of manufacture 1995
Operating hours 9,163 hours, as of
June 23
Pressing force main press 90 t
Operating pressure 280
bar
Dimensions of feed chute 1,620 x 1,080 mm
Filling volume /
pressing cycle 2.4 m³
Bale dimensions 1,100 x 1,100 mm, length
variably adjustable 800 up to 1,600 mm
Drive power 2 x 37
kW
Connected load 92 kW
Tying system 4-fold vertical, fully
automatic, prepared for 8-fold cross binding
Throughput rates for
quality:
B12 / B19 approx. 10 t/hour, bale weight up to 1200
kg/bale
Foil approx. 10 t/hour, bale weight up to 800
kg/bale
Hydraulic oil tank capacity 1,500 L
PLC control system
Siemens SIMATIC S7-1500, renewal in 2020
Press dimensions built
up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h)
Transport
dimensions 12,800 x 2,500 x 3,100 mm (l x w x h)
Machine weight
press approx. 30 t
Noise level <90 dB (A)
Special
equipment:
REFUSE ram, with which, for example, residual waste,
wood, straw, hay and textiles can also be compacted.
Hardox press
floor
Use as a revision press 1995 to 2020:
The baler was
originally in operation in an incineration plant as a so-called
revision baler for only 6 - 8 weeks per year. Whenever the incinerator
was undergoing inspection (repair and maintenance), the material to be
incinerated was pressed into bales with the BOA baler, then stretched
with foil and stored outdoors until winter. The press was only in
operation for these maintenance periods, hence the extremely low
operating hours.
The following repairs and partial overhauls
were carried out:
2018: All hydraulic cylinders were dismantled,
disassembled and the seal sets renewed, some of the cylinders were
also overhauled.
2020: The old PLC control system was replaced
with a completely new Siemens O651246 SIMATIC S7-1500 control
system.
2023: The CPU of the control was renewed and in April 2023
the last maintenance was carried out on the press.
After the
overhaul and renewed commissioning at a medium-sized waste disposal
company for paper, cardboard and films, the press will now be replaced
by a larger machine on 22.09.23 after a further approx. 3 years of
use.
Scope of delivery:
Only the baler with chute is for
sale. The conveyor belt is not included in the delivery and is not for
sale.
Comments:
The documentation (operating
instructions, CE declaration, electrical and hydraulic circuit
diagrams) for the press is available. An inspection is possible by
arrangement. We do not accept any liability for the technical
specifications or any errors.
seller offer No. resale
BOA_2100_yoc_1995
|