描述: |
收缩封隔机 beck packautomaten KV 600 HP on-line
二手机
Overview The KV 600 HP on-line shrink packer was built in 2016 by
the German manufacturer beck packautomaten. The machine is fully
functional, in very good condition and was only in single-shift
operation from July 2016 to October 2017. After that it was stored as
a backup. Technical details Output: 20 packs/minute Operating hours:
1,265 h The following items were packed: Beer cans in trays (L x W x
H) 405 x 205 x 120 - 170 mm 405 x 280 x 120 - 170 mm, transported
crosswise Film quality Polyethylene shrink film (flat film),
Monoaxially shrinking, thickness 30 - 50 μm Max. roll diameter: 250
mm Inner core diameter: 76 mm Welding width max. 600 mm Passage height
280 mm (The pack height depends on the type and format of the product,
film quality and film thickness) Packaged goods height max. 170 mm
Packaged goods length max. 450 mm Working height 880 mm +/- 50 mm
Running direction of the packaging system from left to right;
operating side on the right Infeed and outfeed belt conveyor,
installed: For automatic goods transfer in line Equipped with
separately switched drive motors With laterally adjustable guides if
required Film roll holder for top and bottom film: Motor-driven
support bearing block Max. film roll diameter: 250 mm Regulated film
take-off Centrally adjustable side guides for the film rolls
Continuously heated transverse sealing system: Pneumatic B558209
operation; air consumption approx. 140 NL/min. at 6 bar, dry and
oil-free Machine control: Siemens S7; Simatic Touch Panel Display of
operator information, machine status and error messages 2-fold piece
counter; operating hours counter Operating console Control panel for
convenient set-up Control of the beck thermal shrink unit via touch
panel User-friendly menu navigation Easy retrieval of data from the
packaged goods data memory Electrical supply 3P/N/PE AC (TN-S) 230/400
V, 50 Hz RCD protection device at least 300 mA Connected load 14
KW seller offer No. resale DE-PAC-BEC-2016-00001
|