| 描述: |
双螺杆挤出机 Bandera 55LD42 + KYARA
二手机
Twin-screw extruder complete with gravimetric dispensers, water
refrigeration system and bigbag weighing and filling system
Sale of production line consisting of:
⢠A BANDERA model 55LD42 twin-screw extruder;
⢠A dispenser called âKYARAâ positioned upstream of the
extruder, in the part closest to the
motor. The Kyara consists of four granule hoppers that mix up to four
different
materials. The mix obtained is then managed by a single main dispenser
(DOS 1) positioned
naturally also upstream of the twin-screw line. The charge of the four
KYARA hoppers is
completely automatic and managed by a blower positioned on the ground.
The latter is connected
with four lances which must each be inserted into a different bag of
material that has been chosen
mix. The mixture proportions are set by an operator directly on the
panel
control dedicated to the dispenser;
⢠A dispenser called (DOS 2) suitable for both granules and
powder, with automatic loading
by means of a dedicated blower and placed in the same position as
dispenser 1;
⢠An automatically loaded powder-only dispenser with blower
positioned on top of the frame
(DOS 3). This dispenser is positioned in the section of the twin screw
immediately following the
dispensers 1 and 2;
⢠A dispenser for powder only, loaded entirely manually by an
operator (DOS 4)
positioned in the section of the twin screw closest to the head;
⢠All dispensers were supplied by E661673 Epistolio Srl.
⢠No. 2 twin-screw dispensers positioned on the side part of the
extruder used for using the
powder in the various mixtures. The twin screws are fed directly from
dispensers 3 and 4 and can
work both at two different speeds;
⢠A dosing pump for liquids;
⢠A degassing system;
⢠A water cooling tank;
⢠Two cold air cooling and drying tunnels;
⢠A cutter;
⢠A vibrating screen;
⢠A hot air drying and drying system;
⢠A bigbag filling system with relative scale.
⢠A manually loaded mixer positioned separately from the
line;
seller offer No. resale P231201124
|