描述: |
注塑机 Arburg Allrounder 570 H 2000-1300
二手机
This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding
Machine was manufactured in 2014 in Germany. It has a clamping force
of 2000 kN and is equipped with thermoplastic cylinder of 60mm with
long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating
tape for open nozzle). In addition it features a servoelectric mold
height adjustment with automatic clamping force control, a central
clamping platen set à 125 mm, a maximum installation dimension
increased to 650 mm and injection pressure increased by 10% (max. 2500
bar depending on screw). See overview of full configuration attached
as PDF (DE) below. Important remark: The injection unit is leaking,
there is a cost estimate from Arburg for approx. 15,000 euros net
including assembly. This defect has not yet been G649640 rectified as
the machine is not currently being used. The sale does not include the
housing, any hoppers visible in the pictures or other accessories. The
machine has already been taken off the grid and cannot be inspected in
operation. Pump hours at at 63,202 and
operating hours at 50,361 h. seller offer No. resale
DE-INJ-ARB-2014-00001
|