描述: |
CNC Bohr- und Montagelinie, ALBERTI SYNCRO-PLUS
CNC drilling line
Brand: Alberti
Type: Syncro-Plus
New machine
Line with 5 controlled axes for vertical drilling from below. Options
also allow grooving,
milling and insertion of fittings.
This Syncro line can be very well combined with the BMF series of
Alberti.
Autom. or manual loading with longitudinal workpiece transport
Monolithic frame in welded strong steel
Independent control of all axes with drilling cycle optimization
5 independet asex
X1 Feed rate belt conveyor, 100 m/min
X2 Control of reference stops, 55 m/min.
X3 Workpiece transport control in relation to the workpiece width, 15
m/min.
Y Drill head control, 45 m/min
Z Machining depth control, 10 m/min
Remark:
Max. Workpiece dimensions: 3000x900x30mm
Min. workpiece dimensions: 300x130x12mm
Geometry of workpieces: Length > Width / Length = Width / Length < 20%
Width.
Machining head:
1 vertical drilling unit with 9 independent spindles in Y-direction,
32mm grid.
1 vertical drilling unit with 9 independent spindles in Y-direction,
32mm grid
Work table:
- Motorized roller conveyor for the infeed, PVC coated and inverter
controlled.
- Workpiece clamping system with pneumatic cylinder
- Reference table integrated in the machine bed with rollers, PVC
coated
- Motorized roller conveyor for the outfeed
TPA Albatros software
Optionally available at extra cost:
Drilling units:
Vertical drilling unit: 3 spindles for fittings, monobloc.
Vertical drilling unit: 18 spindles in Y; replaces the standard
drilling unit with 9 spindles
Vertical drilling unit: 17 spindles in Y; replaces the standard
drilling unit with 9 spindles
Vertical drilling unit: 3 spindles for hardware drilling, separately
driven with 1.5 HP
- Horizontal drilling unit: 1+1 spindles in X-direction, 50mm drilling
depth, max. 10mm Ø
- Horizontal drilling unit: 1 spindle in Y-direction, 45mm drilling
depth, max. 10mm Ø
Grooving saw, separately driven, max. Ø120mm, 120000 rpm.
Milling cutter, 7,5 HP, 12000-18000 rpm, tool Ø 20mm.
fitting insert:
- single insert unit
- double insertion unit, for 110° and 180
- W614335 insert unit for plastic fittings
Magazines:
- 6 magazines for a total of 30-35 fittings (depending on fitting
type).
- Extension of the 6-fold magazine for 40-45 fittings
- Magazine with vibratory feeder for max 150 fittings
- Vertical magazine for 135°, max 20-25 fittings
- Runway magazine for 175 / 180°, max 20-25 fittings- Set Runway
Magazine:
4 pieces for 175 / 180°, 18-20 fittings
- Preparation for vertical magazines and magazines with vibratory
feeder
- Magazine with vibratory conveyor for plastic fittings
- Support and side pressure for door frames during stacking
- Supports for zero line guidance
- Driven belts for the transport of door frames and drawer fronts
- Uninterruptible PC power supply
- PLC for control of autom. loading and destacking
- Dongle for offline editor functions
- Barcode reader
- Control cabinet air conditioning seller offer No. resale 1110171
|